Designed & Constructed, to give
higher life of the equipment.
|| Rope Drum
is fitted in
the Drum Housing constructed inline
with the Side Plates supporting the
Rope Drum. This, instead of Long distance
bolts gives better strength &
lesser skewing effect to the drum.
Type ‘N’ Hoists are designed
with Long Distance Bolts.
Easily accessible, designed with -
separate independent units –
Motor Side (Driving Part), Gearbox
(Intermediate), Mechanism Side (Driven
Part) & Control Unit. Giving ease
of maintenance to the user.
of fix suspension (no travel –
only hoisting), pull-push or geared
(manual travel) or electrically operated
traveling of the load
Rotor Motor – Z Start Motor
(Make: Anker) for MI-0 Hoist. For
Other models, Squirrel Cage Induction
Motor fitted with Electromagnetic
Brake are used.
as per IS:
3938 (Indian Standard) for Class II
& Class IV (medium duty &
heavy duty) application
|| Tested at
25 % Overload
As per IS:
15560 – 2005, supported on Thrust
from Seamless pipe & grooves are
at approx. 2/3rd of height of the
wire rope dia. to have proper sitting
in the drum.
proper guide along the axis of Rope
slides & is easy to dismantle
from rope drum while maintenance.
Material, precise machined, gear hobbed
& case hardened – duly annealed.
Spur / Helical combination to provide
strength & smooth operation. Gears
shall be lubricated with a semi-liquid
grease / oil as per the designs.
Motor – operating on 415 Volts,
3 Phase, 50 Hz AC Supply with In-built
braking mechanism (For MI-0 Hoist)
& Hoist Duty, Squirrel Cage Induction
Motor with high starting torque –
operating on 415 Volts, 3 Phase, 50
Hz AC Supply with Electromagnetic
Brake. Continuously rated, Suitable
for frequent reversing & braking.
type, Spring Loaded acting at any
load position (For MI-0 Model) &
A.C. Electromagnetic Brake for Other
Panel Unit: Totally
enclosed to protect from Weather /
Dust, giving output at 24 Volts to
the Operational Control Station (Push
Control Station: Suspended
from Hoist with a Cable & supporting
Wire rope – with two push buttons
extendable to four / six push button
station. Operated with 24 Volts.
for protection to Motor
to control movement of Hook in Hoisting
motion at decided levels activated
by Rope Guide for Upper limit, Lower
limit & Overlowering..
Creep Speed arrangement, Special Control
Panel Station, higher lift, Short
Head room also can be supplied at
an extra cost.